Vista RF’s VNA-01-1500-28 vector network analyzer includes a 2.8″ TFT touch screen, with a simple interface that allows for calibrating and measuring S-parameters (S11 and S21). SWR, Phase and Smith chart capability.
Description:
- New Upgraded Version: Compared with old version NanoVNA, it save more costs with the addition of ABS casing and the new packaging. Hot stamping technology and plastic inner protection reduce the problems caused by transportation shocks and other processes. Support time domain analysis function (TDR).
- USB-C to USB-C: Support USB-C to USB-C line, more convenient to connect to mobile phones. Compatible with most Android phones with the same screen display (doesnt support for iPhone). Solve the problem of small screen, insufficient brightness and so on. Besides, the battery usage can be displayed on the interface.
- Wide Range Frequency: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 10K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- Unit is designed to Original Equipment (OE) fit, form and function Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, please manually replace the transceiver port wiring. Other details have been improved.
Specification:
– Condition: 100% brand new high quality
– Product Name: Vector Network Analyzer
– Color: Black
– Measurement frequency: 10KHz ~ 1500MHz
– RF output: -13dbm (maximum -9dbm)
– Frequency accuracy: <0.5ppm
– Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB (900M-1.5GHz)
– Port SWR: < 1.1
– Display: 2.8 inch TFT (320 x 240)
– USB interface: USB type-C
– Communication mode: CDC (serial)
– Power: USB 5V 120mA, built-in 650mAh battery, maximum charging current 1.6A
– Number of calibration points: 101 (fixed)
– Number of scanning points: 101 (fixed)
– Display Tracking: 4, Marking: 4, Setting Save: 5
– PCB: 54mm x 85.5mm x 11mm/2.12″ x 3.36″ x 0.43″ (without connectors, switches)
– Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart…
– Can interface to Matlab via included software (Matlab not included).
Package Includes:
1X Vector Analyzer Host
2X 20cm SMA Male to Male RG174 RF Cable
2X SMA Female to Female Connectors
1X SMA Calibration Kit SHORT
1X SMA Calibration kit OPEN
1X SMA Calibration kit LOAD
1X USB Type-C Data Cable
1X USB-C to USB-C Line
1X Touch Paddle
Reviews
There are no reviews yet.