Introducing the Vista RF SA-SM1960C Spectrum Analyzer, a highly sensitive and precise instrument designed for a wide range of radio frequency analysis applications. This analyzer is ideal for professionals and hobbyists who need to measure signals within the 100KHz to 960MHz frequency range.

Key Features:

1. High Sensitivity: Tailored for frequencies ranging from 100KHz to 960MHz , this spectrum analyzer is capable of handling a broad spectrum of RF applications with high sensitivity.
2. Screen: Resistive 2.8″ Touch Screen
3. Robust Build Quality: The device is encased in an aluminum alloy shell, reflecting fine craftsmanship and durability.
4. Safe Input Power Range: It is designed to handle a maximum input power threshold of +10dBm to prevent damage.
5. Convenient Connectivity: Equipped with a USB interface and an SMA @ 50ohm interface, it offers versatile connection options for various setups.

• Frequency Range: Spectrum analyzers like the SA-SM1960C, use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes.
• 2 in 1 Device: When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinysa contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range
•  Input/Output Spec Model: The input/output specification of the SA-SM1960C is split over the 4 modes: Low input mode, High input mode, Low output mode, High output mode. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. The firmware of the tinySA can be updated by the user, For newest firmware version update, please refer to : tinysa.org
• PC Control: The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel. Two softwares to control the tinysa are available. Both are able to capture the screen of the tinysa
• Package SA-SM1960C Spectrum Analyzer x 1;
• 20cm RF Cable x 2;
• USB Cable x 1;
• SMA Female to Female Connector x 2;
• Touchscreen Pen x 1 ;
• SMA Telescopic Antenna x1.
• Reliability you can trust, our spectrum analyzer caters to your diverse needs.

The Vista RF SA-SM1960C Spectrum Analyzer is a compact, lightweight, and powerful tool, perfect for a variety of RF analysis tasks, from laboratory research to field testing.

Specifications:

1) Spectrum testing range: 100KHz~960MHz.

2) Display: 2.8 inch LCD Resistive Touch Screen.

4) Control: Jog switch control

5) Interface: all English display interface

6) Power: 500 mAh Lithium battery included (2 hr. operation) and USB to charge

7) Input Port: SMA/K

8) input impedance: 50 ohm.

9)RBW: 50KHz, 100kHz, 200kHz and 500KHz are adjustable.

10) Number of screen scanning points: 290.

11) Dynamic range: – 80dBm to +10dBm. There is no amplification circuit inside the machine. If small signal needs to be measured, external amplifier is required.

13) Maximum input signal: +10dBm.

Package contents:

1x Spectrum Analyzer

1x USB cable

1x Antenna

1x SMA-F 2X BNC-K connector

PC Control

The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel. Software will be provided free after purchase.